45W LED Bar extremely heavy duty, 150x7cm, IK 10 impact resistant / IP 69K waterproof / 45W 7000 Lumen / PMMA housing for use in aggressive environments.
Light color 6000K for industrial applications.
Can be used for lighting production hall, slaughterhouse, cold store, cold store, fish processing, car wash/car wash, livestock shed
and for use at sea such as ships, work islands, quay lighting, etc.
Mounting using stainless steel 316 mounting brackets.
Light color: for industrial applications 6000K bright daylight.
The PMMA housing is translucent white to prevent prying eyes/glare from the powerful LEDs.
- Water - Tear - Resistance and Impact proof - .
- IP Value: IP 69K waterproof (high pressure waterproof)
- Housing: PMMA IK10 impact resistant
- HACCP
- working temperature -45°C to +45°C
- Light color: 6000K other light colors on request.
- Voltage AC 200-240V
- Power 45W
- 7000 Lumens
- Frequency 50-60Hz
- Power Efficiency:>95%
- Isolated LED driver
- Supplied incl. mounting material
- Complies with: LM79-08 and LM 80-08
The IP69K rating provides protection against dust ingress, protection against high temperatures and high pressure (water) – making products with this certification ideal for use in conditions that require careful decontamination of equipment. In sectors such as food processing, where hygiene and cleanliness is a priority, equipment must be able to withstand not only high pressure but also high temperature. In many industries, where dust and dirt can be a problem, it is important to ensure that the dust cannot penetrate the housing of a product and cause malfunctions.
The IP69K rating is the highest possible protection available.
How is a product tested to qualify for the IP69K rating?
Products rated IP69K undergo a challenging set of tests to ensure they provide adequate protection against high pressure and high temperature. The water penetration tests themselves were done by placing the product on a turntable with a rotational speed of 5 ±1 revolutions per minute. The product is then tested by spraying at a short distance at a rate of approximately 4 gallons/16 liters of water per minute with water pressure between 1160-1450 psi, at a temperature of 176°F / 80°C. The distance from the nozzle from which the water is sprayed to the distance from the product is about 10 cm and is done from different angles. After this rigorous testing procedure, if the product can completely withstand water ingress, the product will receive the IP Rating.
PMMA is highly resistant to
- alum
- aluminum chloride
- aluminum sulfate
- ammonia
- ammonia gas
- ammonium chloride
- ammonium sulfate
- arsenic acid
- petrol
- calcium chloride (aqueous)
- citric acid
- diesel oil 100%
- formalin
- formaldehyde 40%
- freon II
- phosphoric acid 5O%
- photo developer
- glycerin
- glycol (concentrated)
- caustic potash
- potassium bichromate
- potassium bromide
- potassium carbonate
- potassium chloride
- potassium cyanide (aqueous)
- potassium nitrate
- potassium hydroxide 50%
- potassium perchlorate
- potassium permanganate
- potassium persulfate
- table salt (see sodium chloride)
- carbonic acid
- copper chloride
- copper sulphate
- mercury
- magnesium chloride
- magnesium sulfate
- lactic acid 10%
- lactic acid 90%
- formic acid 10%
- sodium carbonate
- sodium chlorate
- sodium chlorite
- sodium chloride
- sodium hydroxide 30%
- sodium hydroxide 5%
- sodium hydroxide 50%
- sodium sulfide
- nickel sulfate
- sodium thiosulfate
- oil engine
- vegetable oils
- oils mineral
- oils animal
- oxalic acid 50% (aqueous)
- ozone
- paraffin oil
- perchloric acid 20%
- petroleum ether
- propane liquid
- nitric acid < 10%
- stearic acid
- turpentine
- turpentine oil
- transformer oil
- urea < 20%
- urine
- Vaseline
- water
- hydrogen peroxide 30%
- tartaric acid
- wine acid
- ferric chloride
- soap solution concentrated.
- seawater
- zinc chloride
- zinc sulfate
- hydrochloric acid 30%
- sulfur dioxide dry
- hydrogen sulphide (dry)
- sulfuric acid 10%
